probst WEZ-06 Operating Instructions Manual page 44

Operation and Adjustment
It is not allowed to set up (lift) lying gripping goods (L-bricks) or to change their position (from the vertical
to the horizontal position)! (→ Fig. 5).
In the same way, lifting of gripping goods in the empty stroke position (of the suspension) is prohibited! (→
Fig. 6). As well as off-centre lifting (→ Fig. 7). Always position the device centrally on the load! (→ Fig. 8)
If this is NOT done, damage to device may occur and there is a danger of ACCIDENTS (danger of slipping of
the load)!
53100438
Fig. 5
Fig. 7
16 / 22
Fig. 6
Fig. 8
GB