Harvesting Plants; Setting Sleep Mode; Starting Standard Mode Manually - Bosch SmartGrow Life MSGP3L CN Series Information For Use

en operation
Add 1 spoon (2 g) of nutrients to
1.
1 litre of fresh tap water.
Slowly pour the nutrient solution
2.
into the plant tray.
Maximum capacity has been
reached when the light unit flashes
white twice.
6.4 Harvesting plants
You can start harvesting your
1.
plants or fruit when they are big
enough.
28
Once you have harvested your
2.
plants in their entirety, descale all
parts and clean them thoroughly.
→ "Cleaning and servicing",
Page 30
6.5 Setting sleep mode
The device automatically goes into
sleep mode after 16 hours of activity
and wakes up again after 8 hours.
To change the start time of sleep
1.
mode, wait until the time you re-
quire.
Touch the touch button for
2.
3 seconds until the light unit
flashes twice.
a The device starts the 8-hour sleep
mode.
a The start time for sleep mode is
saved and is retained until it is
changed again.
Note: Sleep mode should begin in
the evening so as to give your plants
time to rest in the dark. This also
means you won't be disturbed by the
bright light, e.g. in the bedroom.
6.6 Starting standard mode
manually
The device automatically goes into
standard mode after 8 hours of sleep
mode.