NEC UNIVERGE SV9500 User Manual page 227

• To disable Bluetooth
STEP 1: Press the Connect key for several seconds (
more than three seconds when the Blue-

tooth feature is ON (the Connect key is turn
on)).
STEP 2: The Connect key turns off, and the Blue-

tooth feature turns OFF. The mobile phone,
which is connected to Bluetooth
ibly disconnected.
If the connection process between DT830G and the
Note
mobile phone is performed during pairing mode, the

Bluetooth feature cannot be disabled.
When the Connect key has not been pressed for 10
minutes while the Bluetooth
Note
the terminal, the Bluetooth
turn OFF.

feature

, will be forc-

adapter is connected to

feature will automatically

• Bluetooth
mobile phone

Bluetooth connection is manually or automatically
available between a terminal and a mobile phone
whose pairing process has been completed. From
the terminal, a Bluetooth
tablished only to the most recently connected mo-
bile phone.
• Automatic Connection
STEP 1: Be sure to confirm that Bluetooth
tion is ON (the Connect key lamp lights red).
STEP 2: The most recently connected mobile phone
must be within the range of a Bluetooth
nection (approximately 10 meters).
STEP 3: The Bluetooth
minal and the mobile phone is established
automatically.
When Bluetooth
the mobile phone is established during a conversation,
the voice communication is interrupted due to a switch
Note
to the Bluetooth
sation after 8 seconds since the voice communication is
disconnected.
219
connection from DT830G to

connection can be es-

connection between the ter-

connection between the terminal and

output. You can return to the conver-

connec-

con-