NEC UNIVERGE SV9500 User Manual page 106

STEP 20:Press or Exec to start the data backup.
While making a backup copy, the LCD displays
"Uploading...", and when the data backup suc-
ceeded, LCD displays "Upload Complete!". If the
data backup failed, LCD displays "Upload Failed!".
STEP 21:After the data backup is complete, the display
changes as follows:
Upload Complete!
STEP 22:The display goes back to the Backup/Re-
Incorrect IP address of
FTP/TFTP server has
been entered from the
telephone.
The power to FTP/TFTP
server or network
equipment is OFF.
Exit
LAN cable is
disconnected.
98
store screen by Exit.
When the data backup ends in failure, "Upload Failed!"
Note
is displayed on the LCD. Check to see the following and
make a retry.
Check Points Actions
Set the proper IP address
of FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.