NEC UNIVERGE SV9500 User Manual page 102

STEP 5: Choose a protocol used by the destination
server.
Select an item by one of the following operations.
• Highlight an item by using
and press
1 2
• Press or
[Protocol]
1 FTP
2
TFTP

STEP 6: The display goes back to the Backup/Re-
store screen.
1
When FTP is chosen here, go to the next
Step (STEP 7).
2
When TFTP is chosen here, go to STEP
15.
5
STEP 7: Select FTP Settings.
Select an item by one of the following operations.
• Highlight an item by using
and press
5
• Press .
or UP/DOWN soft key,
or OK.
, and press or OK.
1/1
Back OK
or UP/DOWN soft key,
, or OK.
[Backup/Restore]
1
Data Backup
2 Data Restore
3 Server Address
4 Protocol
5 FTP Settings
1
STEP 8: Select
Select an item by one of the following operations.
• Highlight an item by using
and press
1
• Press
[FTP Settings]
1 User ID
Password
2
3 Folder
STEP 9: Enter a User ID.
Enter a User ID by using digit keys, then press
or OK.
94
1/1
Back OK
User ID.
or UP/DOWN soft key,
, or OK.
.
1/1
 Back
OK