Security Mode - NEC UNIVERGE SV9500 User Manual

SECURITY MODE

DT830G has a Security mode which prevents
unauthorized access and information leakage from
terminal. While the telephone is locked, Security Lamp
lights up.
Security key must be programmed in advance. For the
Note
programming of Security key, contact the system
administrator.
For using the feature of the terminal in collaboration
with a mobile phone, the terminal cannot be placed in
Note
Security mode pressing Security key. For details, con-
tact the system administrator
Security lock will be released.
Please input a password.
BK
After a third attempt (if uncorrected password is entered
Note
three times consecutively), the telephone locks up, and
any key operation will be disabled for 10 minutes.
While the telephone is locked,
abled. Also, any features provided by the telephony
Note
server, such as call origination or call answering, can-
not be performed.
Cancel OK
becomes dis-
Menu
To make a call of VOICE CALL is available
toward a called party in the Security mode. When
a called party activates the Security mode with
Note
leaving its MIC to ON, the called party can converse
with a calling party though terminal operation
is restricted.
Even when the telephone is reset for any reason (such
Note
as power-off, etc.) while the telephone is placed in
security mode, the lock is not released.
• TO LOCK THE TELEPHONE
STEP 1: Press Security on the telephone. The follow-
ing message is displayed on LCD.
Option
STEP 2: Press
Security mode.
STEP 3: When the telephone is placed in Security
mode, Security Lamp lights red and the
screen saver will be activated.
146
Security Lock?
Cancel OK
or OK to place DT830G in
(Enter)