Table of Contents
Advertisement
8.
MAINTENANCE
8.1
FIRMWARE UPDATE
The console supports OTA firmware update capability. Its firmware may be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity.
Update function, however, is not available through mobile/smart devices.
Current firmware
version
8.1.1 FIRMWARE UPDATE STEP
1. Download the latest version firmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer
to section 6.1 and 6.2).
3. From the SETUP page, press ADVANCED to enter advance setting
4. Under the firmware upload section, press
your PC/Mac.
5. Press
Upload
The update time is around 5 ~ 10 minutes. While updating, the
progress will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the firmware version and all the current
setting. Simply press and hold [ SENSOR / WI-FI ] key for 6 seconds to exit AP mode.
IMPORTANT NOTE:
- Please keep connecting the power during the firmware update process.
- Please make sure your PC/Mac's WI-FI connection is stable.
- When the update process start, do not operate the PC/Mac and console until the update finished.
- During firmware update the console will stop upload data to the cloud server. It will reconnect to your WI-FI
router and upload the data again once the firmware update succeed. If the console cannot connect to your
router, please enter the SETUP page to setup again.
- After the firmware update, If the setup informations are missing, please input the setup information again.
- Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
8.2
BATTERY REPLACEMENT
When low battery indicator
displayed near the antenna icon of
the sensor(s), it indicates that the
outdoor 7-IN-1 sensor and/or current
channel sensor(s) battery power is low
respectively. Please replace with new
batteries.
Firmware version: 1.00
Firmware update in ADVANCED page
to start firmware update.
or
is
Browse
Upload
to locate the firmware file saved on
Browse
32
Select the firmware file for update
Press to start upload the firmware
to console
Advertisement
Table of Contents
