Inserting The Instrument Or Telescope Into The Clamping Jaw - Karl Storz 28272PSG Instructions For Use Manual

Clamping jaws with a dovetail connection
Table of Contents

Advertisement

 Correct: Both unlock buttons are completely visible.
5.5 Inserting the instrument or telescope into the clamping
jaw
The clamping jaw 28272PSG is suitable for holding rigid endoscopes by the optical block.
The clamping jaw 28272PSK is suitable for fixing telescope sheaths.
1.
Select a suitable clamping jaw for the instrument or telescope.
2.
Place the instrument or the telescope in the clamping jaw.
3.
To close the clamping jaw, turn the rotary knob.
4.
When using the clamping jaw 28272PSG, it is absolutely essential to ensure that the
telescope is correctly clamped.
5.
With large telescope heads (10 mm telescopes), the clamping jaw must be mounted flush
with the upper edge of the telescope head.
Instructions for use • Clamping Jaws with a Dovetail Connection • TYA258_EN_V1.0_02-2021_IFU_CE-MDR
Preparation
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

28272psk28272vtp

Table of Contents