Running The Motor - Vacon NXL User Manual

Safety
1.4

Running the motor

Warning symbols
For your own safety, please pay special attention to the instructions marked with the following
symbols:
Dangerous voltage
=
General warning
=
WARNING
Hot surface – Risk of burn
=
HOT SURFACE
MOTOR RUN CHECK LIST
1
2
3
WARNING
4
5
NOTE! You can download the English and French product manuals with applicable safety, warning
and caution information from www.vacon.com/downloads.
REMARQUE Vous pouvez télécharger les versions anglaise et française des manuels produit
contenant l'ensemble des informations de sécurité, avertissements et mises en garde applicables
sur le site www.vacon.com/downloads.
24-hour support: +358-40-8371 150 • Email: vacon@vacon.com
Before starting the motor, check that the motor is mounted properly and
ensure that the machine connected to the motor allows the motor to be
started.
Set the maximum motor speed (frequency) according to the motor and
the machine connected to it.
Before reversing the motor shaft rotation direction make sure that this
can be done safely.
Make sure that no power correction capacitors are connected to the
motor cable.
Make sure that the motor terminals are not connected to mains
potential.
vacon • 9
1