Statement Of Warranty; Garantie - Nilfisk-Advance SelectSpray 1250E Instructions For Use And Parts List

Your Nilfisk-Advance equipment which has been manufactured, tested and inspected in accordance with carefully specified
engineering requirements, is warranted to be free from defects in material and workmanship. This warranty is, however, subject
to the following qualifications, conditions and limitations which are set forth to provide you and all users of the Nilfisk-Advance
equipment with information concerning the duration, extent, availability and applicability of this Nilfisk-Advance limited
warranty, the procedure to be taken to obtain its performance and other information concerning the Nilfisk-Advance warranty
policy.
The Nilfisk-Advance Limited Warranty is extended to the original end user as follows:
KW Series pressure washers 1 year parts replacement and service labor warranty. Normal wear parts including hoses,
gaskets, pump seals and nozzles guaranteed against defects for a period of 90 days from date of sale. Honda engines are
warranted by American Honda Co., Inc. for a period of 1 year.
Replacement parts guaranteed for 90 days from date of installation against defects in material and workmanship.
The 10 year poly component replacement warranty with 1 year service labor extends for a period of ten (10) years from the
date of the original purchase of the Nilfisk-Advance equipment by the original purchaser. This warranty will not cover damage
attributable to the following:
(1) Improper, unreasonable or negligent use of abuse of the equipment.
(2) Use of equipment with hot water or high temperature above 130 degrees Fahrenheit (54 degrees Centigrade).
(3) "Warpage", "Creepage", or "Distortion: of part so long as the same does not interfere with normal operation.
(4) Abrasions or punctures of the equipment.
The start date of the warranty coverage shall be the purchase date of the original end user or 1 year from the date the machine
was shipped from the factory, whichever come first. Proof of purchase will be required.
PARTS OF Nilfisk-Advance EQUIPMENT NOT COVERED BY WARRANTY
Certain parts of Nilfisk-Advance equipment require replacement in the ordinary course of use due to normal wear by reason
of their characteristics. These are normal wear items such as cords, gaskets, switches, bumpers, carbon brushes, handle
grips, bags, hoses, bearings, etc.
EXCEPTIONS AND EXCLUSIONS FROM WARRANTY
This equipment is required to be used on electric current as indicated on the data plate. Otherwise damage, defects,
malfunctions or other failures of the equipment arising from use on electric current not as indicated are excepted and excluded
from this warranty. Defects, malfunctions, failure or damage of the equipment caused by improper, unreasonable or negligent
use or abuse other than those designated as authorized to perform such work without first having obtained factory instructions,
Nilfisk-Advance, Inc., at its sole option, may determine that this warranty will not apply and that reimbursement for such repair
will not be made because of the failure to comply with such factory specified instructions.
PROCEDURE TO BE TAKEN TO OBTAIN PERFORMANCE OF WARRANTY REPAIR
To secure repair of the equipment or any warranted parts under this warranty, the following procedure should be taken. The
inoperative equipment or warranted parts, together with satisfactory evidence of the purchase date, must be delivered, with
shipping and deliver charges prepaid, to one of the following:
(1) The dealer from whom purchased;
(2) Any Nilfisk-Advance distributor's service department in the United States;
(3) Any Nilfisk-Advance authorized service station in the United States.
If you are unable to locate any of the foregoing, you may write or otherwise communicate with Nilfisk-Advance, Inc. for
instructions before repair service is performed by anyone else. In such event, Nilfisk-Advance, Inc. will provide either the
location of a closely available Nilfisk-Advance distributor service department or Nilfisk-Advance authorized service station or
other factory instructions. Upon compliance with the above procedure, all warranted defects will be repaired, at no additional
charge or costs to the customer, and the repaired product returned to the customer, with all shipping and delivery charges
prepaid. In following the procedures above set forth, PLEASE MAKE CERTAIN to state the Nilfisk-Advance model, type and
serial number as shown on the data plate of the equipment.
REPLACEMENT
In the event of a defect, malfunction or failure of your Nilfisk-Advance equipment or any warranted part to conform with this
warranty, Nilfisk-Advance, Inc. may, at its sole option and own expense, replace the equipment or any warranted part with
another new identical or reasonably equivalent model or part in lieu of repairing the defect.
NO REFUND OF PURCHASE PRICE
Nilfisk-Advance, Inc. will not, as a matter of its warranty policy, refund the customer's purchase price.
WARRANTY REGISTRATION CARD FOR YOUR Nilfisk-Advance EQUIPMENT AND INFORMATION REQUEST
Your Nilfisk-Advance, Inc. distributor from whom you purchased your equipment is responsible for the registration of your
warranty with the factory. We ask that you cooperate with your distributor in supplying the necessary information on the
warranty card so that we may better serve you. Any information or questions you may have concerning your Nilfisk-Advance
equipment or this warranty may likewise be secured from the factory. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
48
THE NILFISK-ADVANCE LIMITED WARRANTY
THE Nilfisk-Advance COMPANY
14600 21st Avenue North
Plymouth, MN 55447-3408
Guide d'utilisation du CM électrique