Advertisement
BATTERY INSTALLATION
If you haven't already done so, remove the cover from the back of the computer console
and install 4 AA alkaline batteries. You will hear a beep and all segments of the LCD will
light up for 2-3 seconds. You will then see the initial setup display as shown below.
SETTING TIME and DATE
1. At the HOUR position, the 0 will be flashing.
2. Press the UP button to select 0-23.
3. Press the MODE button to set minutes and 00 will be flashing.
4. Press the UP button to select 00-59.
5. Press the MODE button and the year position will be flashing.
6. Press the UP button to set the year.
7. Press the MODE button and the month position will display 01 and flash.
8. Press the UP button to select 01-12.
9. Press the MODE button and the date position will display 01 and flash.
10. Press the UP button to select 01-31.
11. Press the MODE button to confirm the date setting and this completes the initial time
and date settings.
SECTION 5 – INITIAL SETUP
0:00
01.01 2003
TIME
25
BF-7.0E
Advertisement
