Kanguru Cd Duplicator Functions; Function Of Leds; Function Of Buttons - Kanguru CD Duplicator User Manual

KANGURU CD DUPLICATOR FUNCTIONS

FUNCTION OF LEDs

A. During stand-alone copying mode:
READY
LED will turn on while the CD is being ready
COPY
LED will turn on while the CD is being copied.
ERROR
LED will turn on when there is an error in copying.
B. During USB mode:
READY +
Note : All LEDs will turn on while in EXTERNAL writer mode

FUNCTION OF BUTTONS

MODE: MODE + SPEED
Pressing
•
Note: For both these functions you must hold the
the second button
and then release the
SPEED:
Pressing the SPEED button will change the burn speed 16x. This may be helpful if
your media can't handle the higher writing speeds.
RUN:
Pressing the RUN button will start normal CD to CD copy. The default speed is the
MAXIMUM writing speed of the CDRW.
Control Panel of Hi-Copy (located on the front)
COPY + ERROR
together will erase a CD-RW.
(RUN or SPEED). Release the second button
MODE button.
*
MODE button down and then press
(RUN or SPEED)