Table of Contents
Advertisement
DM240-DVB High-Speed Digital Modulator
Rear Panel Interfaces
This section discusses the electrical interfaces available from the rear panel. All locations are as
viewed from the rear of the unit unless otherwise specified.
5.0 DM240 Connections
All DM240 connections are made to labeled connectors located on the rear of the unit. Any
connection interfacing to the DM240 must be the appropriate mating connector. Refer to Figures
5-1a and 5-1b (non-PIIC), Figures 5-2a and 5-2b (PIIC), or Figure 5-3 (DVB-S2) for connector
locations.
PlICs may be different from those shown in Figures 5-2a and 5-2b. Refer
to Section 5.14 for all PIIC pinouts.
Figure 5-1a. DM240 Rear Panel Connectors (70/140 MHz)
Figure 5-1b. DM240 Rear Panel Connectors (L-Band)
TM083 – Rev. 3.0
Rear Panel Interfaces
5
5-1
Advertisement
Table of Contents
