Table of Contents
Advertisement
DM240-DVB High-Speed Digital Modulator
The modulator is considered in a test mode when the
inner FEC is bypassed."
::= { radSNMP_Mod_NV_Status 48 }
radRfSwitchRedundancyMode OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
auto_revert(2),
backup(3)
}
ACCESS read-write
STATUS current
DESCRIPTION
"If the modulator is connected to the prime
side of the switch then manual and
auto_revert modes are available. Otherwise,
if modulator is connected to backup side
then only manual and backup modes are
available."
::= { radSNMP_Mod_NV_Status 49 }
radRfSwitchActivateSide OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
backup(2)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Activates the primary or backup side of
the RF switch."
::= { radSNMP_Mod_NV_Status 50 }
radRfSwitchFaultTestMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
faulted(2)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Allows the assertion of the fault signal
to the RF switch for test purposes"
::= { radSNMP_Mod_NV_Status 51 }
radGoldCodeSeqIndex OBJECT-TYPE
SYNTAX INTEGER (0..262142)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the gold code sequence index."
::= { radSNMP_Mod_NV_Status 55 }
----------------------------------------------------------------------------
-- Status information out of Radyne specific MIB
radMajorAlarmStatus OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"Major Alarm status:
A bit field. 0 = PASS, 1 = FAIL
Bit 1 = Oversample Clock PLL Lock
Bit 2 = FPGA Configuration Error
Bit 3 = Synthesis Clock PLL Lock
Bit 4 = External Reference PLL Lock
Bit 5 = SCT PLL Lock
"
::= { radSNMP_Mod_Status 1 }
TM083 – Rev. 3.0
Appendix B
B-
11
Advertisement
Table of Contents
