Monitor Menu Options And Parameters; Alarms Menu Options And Parameters - Radyne ComStream DM240-DVB Installation And Operation Manual

DM240-DVB High-Speed Digital Modulator

4.2.5 Monitor Menu Options and Parameters

EVENTS:
ERASE EVENTS:
+5V SUPPLY:
+12V SUPPLY:
-12V SUPPLY:

4.2.6 Alarms Menu Options and Parameters

CURRENT ALARM (Menu):
TX MAJOR (Menu)
SCT PLL:
OVERSAMPLE PLL:
SYNTH PLL:
SYS REF PLL:
TX MINOR (Menu)
FRAME SYNC:
FIFO:
TERR CLK ACT:
TERR DATA ACT:
COMMON (Menu)
+12 VOLTS:
-12 VOLTS:
+ 5 VOLTS:
TM083 – Rev. 3.0
Event Buff:
Display/Clear logged events and faults.
Clear Events:
Clear all logged events and faults from the event buffer.
Display the currently measured +5 VDC power supply.
Display the currently measured +12 VDC power supply.
Display the currently measured -12 VDC power supply.
Displays Current Alarm Status.
Status Edit Table
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
{PASS/FAIL, UNMASKED/MASKED}
User Interfaces
4-11