Updating Scan Head Firmware - GeoSlam ZEB VISION Hardware User's Manual

3. Browse -> user defined location of the update file.
a. Select -> OK, to continue.
4. Select -> Yes, to confirm the update (Figure 7).
5. The update will start and should complete in less than 5 minutes.
6. After the update has finished, restart the system, and the process is complete.
Before using the camera, proceed to the scan head firmware update section.
Only updating the camera firmware will result in neither the ZEB Vision or the
ZEB Horizon functioning correctly.
© 2022 GeoSLAM Ltd
Figure 6. Firmware update in progress.
Figure 7. Firmware update confirmation.
Page 13 ZEB Vision User Guide