Maintenance Troubleshooting - Kalamazoo Sculpture Brochure

Sculpture series grills
Table of Contents

Advertisement

MAINTENANCE TROUBLESHOOTING

PROBLEM
Burner does not light. Flame is
low when burner is on HIGH.
Burner flame pattern is erratic.
Flame is low when burner is on
HIGH. Flames do not run the
whole length of the tube.
Experiencing Flare-Ups.
Inside of lid appears to be
"peeling."
Igniters are not working.
If problems cannot be corrected by using these methods, please contact Kalamazoo Outdoor Gourmet Customer
Service at 800-868-1699.
Kalamazoo Outdoor Gourmet
CHECK
Is LP fuel low?
Is fuel hose bent or kinked?
Is burner clean?
Is grill on level ground?
Is flow-limiting device activated?
Are you preheating barbecue in
the prescribed manner?
Are the ceramic tiles coated with
burned on grease?
Are the ceramic tiles positioned
over the burner?
The lid is stainless steel, not
paint. It cannot "peel." What you
are seeing is baked on grease
that has turned to carbon and is
flaking off. THIS IS NOT A
DEFECT.
Is there no clicking noise when
the igniter button is pressed?
Igniters click, but the igniter
probes are not sparking.
1.800.868.1699
RESOLUTION
Refill LP tank.
Straighten fuel hose and check for leaks
(see page 7).
Burner ports are clogged or blocked. Clean
thoroughly (see "Periodic Cleaning").
Turn off all burners. Shut off gas supply.
Move grill to level ground.
See "Lighting Instructions"
Turn main burners on high for 10 minutes
for preheating.
See "Periodic Cleaning."
When grill is turned off and cooled, move
ceramic tile brackets over burner(s).
Clean thoroughly (see "Periodic Cleaning").
FIRST CHECK: Wire connections to igniter
modules (inside grill cabinet) and igniter
button (underneath grill control panel) are
firmly in place.
SECOND CHECK: Replace the 9-volt
battery(s) in the igniter module(s) inside the
grill cabinet.
FIRST CHECK: Wire connections to igniter
modules (inside grill cabinet) are firmly in
place.
SECOND CHECK: Igniter probe (at the
burner) may have shifted. WITH GAS
SUPPLY TURNED OFF, gently adjust or
bend probe closer to burner to gain spark.
THIRD CHECK: Gas collection box (at
burner) filled with water or grease. Gently
wipe collection box out with paper towel.
www.KalamazooGourmet.com
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Outdoor gourmet sculpture series

Table of Contents