Smeg SH670LSS1 User Manual page 22

Prior to removing the light bulb, ensure that it has cooled down.

Remove the grease filter.

Gently press the underside of the LED bulb to remove. Then gently pull the bulb

connecting wire out, and dismantle the terminal of the bulb connecting wire.
Replace in reverse order using only genuine spare part # 1400600301

Note:
Defective bulbs should be replaced immediately.

If the light still does not work, make sure that the internal plug is fitted properly before

you call for technical assistance.
Symbol

shielded metal halide lamps"
means, "Use only with self-shielded tungsten halogen lamps or self-
22