Table of Contents
Advertisement
Slide chimney section (D) inside of chimney section (C). Then secure the L shaped
bracket to the wall, using the same method as you have just used to secure the
lower bracket.
Lift chimney section (D) up to the ceiling and secure it to the L shaped bracket using the
8.
screws provided.
Connecting to external ducting (top)
Top Ducting
through roof
Connect the coupling to the top of the rangehood, using two of the smaller screws
provided (if side ducting, this is either through the wall or the soffit)
Connect a 150 mm ducting hose to a discharge outlet that is suitable for cooking
vapors. Please note that the ducting hose is not supplied with the appliance but one
can be obtained from the retail outlet where you purchased your appliance.
Wall Ducting
16
Recirculating
(Carbon filters required)
Advertisement
Table of Contents
