Related Manuals for Smeg Hood
Summary of Contents for Smeg Hood
- Page 1 Libretto di Istruzioni Instructions Manual Manuel d’Instructions Bedienungsanleitung Manual de instrucciones Manual de Instruções Gebruiksaanwijzing Bruksanvisning Руководство по эксплуатации...
-
Page 3: Operation
Inspect and clean the filters thoroughly and in accordance with the intervals • suggested by the manufacturer. Do not cook or fry in a way that could result in flames being sucked into the hood and • causing a fire. -
Page 4: Installation Instructions
Drill the two previously marked holes after removing the hood from the wall. Fix the two supports/hooks to the wall. Mark the L2 holes on the wall to fix the hood safely. (fig. 4) Drill and put the anchors in the Type 2 holes. - Page 5 Remove the chimney set, drill and fix the support racket to the wall by means of wall anchors. . Put the chimney group back in place and fix it to the hood with the Z screws and to the chimney bracket with the L screws as shown in figure 6.
-
Page 6: Control Panel
CONTROL PANEL: In order to achieve the best performance, it is recommended to start the hood a few minutes before starting cooking and keep it on for at least 15 minutes after finishing cooking or after all fumes and odours have disappeared. -
Page 7: Optional Functions
EXTERNAL CLEANING: External and internal cleaning of the hood should be performed with a damp cloth and a non-bleach liquid detergent, absolutely avoiding solvents or abrasive substances. It is advisable to use specific products, following their instructions. When cleaning the steel... - Page 8 Special attention should be reserved to the metal grease filters. An excess of grease in the filter, as well as affecting the performance of the hood, can also be a fire risk. To avert fires, the filters must be cleaned regularly at least once a month or more frequently, in the case of a heavy use of the appliance.
-
Page 9: Lights Replacement
According to the model, the hood can be equipped with different kind of lighting such as incandescent, halogen and neon lamps. Incandescent lamps: E14 – 40W 230V lamps. To replace them, remove the transparent fixture from the control panel, unscrew the lamp and screw in the new one. -
Page 10: Warranty & Service
TECHNICAL ASSISTANCE SERVICE The hood packaging includes, together with this operating and maintenance booklet, the Smeg Warranty Booklet. Please read the Smeg Warranty Booklet for complete information about the warranty (N.B. bulbs and filters are not covered by your warranty). - Page 11 This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.