Table of Contents
Advertisement
3.
The axis (4) should be inserted into the holes (5) on the body;
4. Repeat steps 1-3 for the 2nd half-part.
INSTALLATION
IMPORTANT: YOUR RANGEHOOD SHOULD BE CONNECTED TO YOUR MAINS SUPPLY
AFTER THE REST OF THE INSTALLATION PROCESS HAS BEEN COMPLETED.
Determine the correct height for the rangehood and fix the hook. Ensure that the hook is
1.
level when fixed. Mark and fix the inner chimney bracket as described in the section "Fitting
the chimney".
Fix the outer chimney bracket to the outer chimney ensuring that the inner chimney is free
2.
to slide to the required height and the exhaust ducting does not impede the movement.
Then fit the exhaust ducting and the chimney assembly to the rangehood and hang on the
hook.
Feed the exhaust ducting to your desired position then adjust the height of the inside
3.
chimney to the inner chimney bracket and screw in place. Once the position is fixed,
secure the unit with two safety screws through the Ø8mm holes in the back casing.
Ducting Pipe
14
Advertisement
Table of Contents
