Remove The Processor From The Carrier Assembly - Supermicro SuperServer SYS-220GP-TNR User Manual

Chapter 3: Maintenance and Component Installation

Remove the Processor from the Carrier Assembly

Once you have removed the processor carrier assembly from the PHM, you are ready to
remove the processor from the processor carrier by following the steps below.
1. Unlock the lever from its locking position and push the lever upwards to disengage the
processor from the processor carrier as shown in the right drawing below.
Lever
Processor Carrier Assembly
2. Once the processor is loosened from the carrier, carefully remove the processor from
the processor carrier.
Note: To avoid damaging the processor and its pins, please handle the processor with care.
42