Advertisement
4
3
2
6
1
Pos.
1. Almohadilla de pulir
2. Conducto de salida de aire (sordina)
3. Conducto de entrada de aire
4. Palanca
5. Tubo de escape de polvo
6. Regulador
Espanõl
Código No.
Tipo...................................................................................
Diámetro de la almohadilla de pulir ...................pulgada
Velocidad libre..........................................................r.p.m
Rosca de eje .............................................................UNC
Diámetro de la rotación .............................................mm
Nivel de ruido ..........................................................dB/A
Vibración ...............................................................m/sm
Mín. tamaño de manguera ...................................pulgada
Entrada de aire .....................................................pulgada
Consumición del aire en 100% int*.........................l/min
Consumición del aire en 50% int*...........................l/min
Consumición del aire en 100% int* ...........................cfm
Consumición del aire en 50% int* .............................cfm
Peso...............................................................................kg
Accesorios:
Almohadilla de pulir 6 " – soporte Velcro .............20749
Almohadilla de pulir 6 " – auto adhesivo .............20749
Manguera de vacuum 1.75 m .................................20749
Bolsa de polvo ........................................................20749
*Con 6.2 bares
5
20749
-0103
-0202
AEX 12
AEX 12 DB
6
6
12 000
12 000
5/16-24
5/16-24
5
5
82.5
88.5
2
2.43
2.56
3/8
3/8
1/4
1/4
300
300
150
150
10.6
10.6
5.3
5.3
0.9
0.9
-0509
-0509
-0608
-0608
-
-0707
-
-0806
58
An easy handle and powerful grinder with a random rotation. For one hand use.
Intended for grinding work by use of Velcro sand paper discs, where a high quality of
the polished surface is required on both metal and wood. Due to the eccentric move-
ment the risk of leaving any tracks of grinding on the surface is reduced. Rear exhaust
with a silencer
(Pos. 2). The tool is equipped with lever recessed into the house (Pos. 4).
Supplied with assemble key and a Velcro grinding pad.
20749-0202 Supplied as standard with vacuum hose and dust bag.
20749-0301 Supplied as standard with connection for central exhaust.
•
User of the tool should always take care of his and other persons' safety. The user
must always use personal protective equipment.
•
Wear safety goggles, in order to reduce risk of eye injuries that could be caused by
flying sawdust, dust and sparkles.
•
Inhalation of dust can be harmful to health. Wear a suitable visor or breathing appa-
ratus, when working in a dusty environment.
•
In case of continuous work wear safety gloves protecting against the cold air.
•
In order to avoid eventual aural injuries, always use ear protection when using the
-0301
tool.
AEX 12 CV
•
The user must always pay attention to the fact that continuous use of rotating and
6
impact producing manual tools could result in baneful influence on health caused by
12 000
the vibration.
5/16-24
•
Ergonomic load: Work with the tools related to recurrent, monotone movements and
5
80.3
unfavourable body positions may cause back, scruff, arm, marrowbone and other
2.56
joint injuries.
3/8
1/4
300
150
10.6
5.3
0.9
-0509
-0608
-
-
Description
Health hazards
19
Advertisement
