Table of Contents
Advertisement
en Home Connect
Basic setting
autoOpen Dry
Wi-Fi
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press
3.
for approx. 3 seconds.
Press
repeatedly until the display
4.
shows the required setting.
Press
or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
approx. 3 seconds.
Close the appliance door.
7.
Setting the time
To open the basic settings, press
1.
for approx. 3 seconds.
Press
repeatedly until the display
2.
shows "Time setting".
40
Selection
off
On in all programmes
On with Eco 50°
on
off
off
Manual
Permanent
1
on
off
Reset
repeatedly until the
Description
Activate or deactivate automatic opening of the
appliance door during the drying phase.
1
If the function has been activated, the running
time may increase.
→ "autoOpen Dry", Page 12
Switch the wireless network connection on or off.
The basic setting "Wi-Fi" is only available once
the appliance is connected to the Home Connect
app.
→ "Home Connect ", Page 40
Activate or deactivate
→ "Remote Start ", Page 41.
This basic setting is not available until after you
have connected the device with the Home Con-
nect app.
→ "Home Connect ", Page 40
Switch display of the brand name logo on or off
when the appliance is switched on.
Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.
Press
3.
display shows the required time.
Holding down
change the set values in 10-minute
steps.
To save the settings, press
4.
approx. 3 seconds.
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
for
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
or
repeatedly until the
and
will
for
Advertisement
Table of Contents
