Table of Contents
Advertisement
Fault
A different error code ap-
pears in the display window.
E:0100 to E:9010
Washing results
Fault
Tableware is not dry.
Cause
A technical fault is present.
Cause
No rinse aid used or dosage
set too low.
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
Water collects in recesses of
the tableware or cutlery.
The combined detergent
used has a poor drying per-
formance.
Troubleshooting en
Troubleshooting
Press .
1.
Unplug the appliance or switch off
2.
the fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the appli-
4.
ance in a socket or switch on the
fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact "Customer Service"
‒
→ Page 62 and give the er-
ror code.
Troubleshooting
Add "Rinse aid" → Page 30.
1.
Set the amount of rinse aid to be
2.
dispensed.
→ "Setting the amount of rinse aid",
Page 30
"Select a programme with drying,
▶
e.g. intensive, strong or ECO pro-
gramme." → Page 19
Some option buttons decrease the
drying result, e.g varioSpeed.
Position tableware at an angle
▶
where possible.
Use rinse aid to improve drying per-
1.
formance.
51
Advertisement
Table of Contents
