Table of Contents
Advertisement
en Troubleshooting
Fault
E:3200 or indicator for wa-
ter supply lights up.
E:9240 lights up.
E:6103 lights up. Water is
not drained.
E:6102 lights up.
E:9001 lights up.
50
Cause
Filters are soiled or blocked.
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Mains voltage is too low.
Troubleshooting
Remove the filter from the supply
5.
hose
Clean the filter.
6.
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Clean the filters.
▶
→ "Cleaning filters", Page 44
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the "Wastewa-
▶
ter pump " → Page 61 so it clicks
into position.
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 61
Secure the cover of the "Wastewa-
▶
ter pump " → Page 61 so it clicks
into position.
This is not a fault on the appliance.
Contact an electrician.
1.
Have the mains voltage and elec-
2.
trical installation checked by an
electrician.
Advertisement
Table of Contents
