Table of Contents
Advertisement
Basic settings
Basic setting
Wi-Fi
Remote start
greeting
Factory setting
Factory setting (may vary depending on device type)
1
15.2 Change basic settings
Tip:Connect your device to a mobile
device. You can easily adjust all
settings using the Home Connect
app.
Open the device door.
1.
press.
2.
To open the basic settings, press for
3.
approx. 3 seconds.
Press repeatedly until the
4.
display shows the desired setting.
or press repeatedly until the
5.
display shows the appropriate value.
You can change several settings.
To save the settings, press for
6.
approx. 3 seconds.
42
Selection
A
Out of
Out of
Manually
Permanently
A
1
Out of
Reset to default
Description
Turn wireless network connection
on or off.
The basic "Wi-Fi" setting is only
available after you have connected the
device to the Home Connect app.
→ "Home Connect", page 43
→ "Remote Start", page 44
deactivate.
This basic setting is only available after
you have connected the device to the
Home Connect app.
→ "Home Connect", page 43
Turn on or off the display of the
brand logo when the device is
turned on.
Reset changed settings to factory
defaults.
The settings must be made for initial
commissioning.
Close the appliance door.
7.
15.3 Setting the time
To open the basic settings, press for
1.
approx. 3 seconds.
Press repeatedly until the
2.
display shows "Time setting".
or press repeatedly until the
3.
display shows the desired time.
By holding down and the setting
values change in 10-minute
increments.
To save the settings, press for
4.
approx. 3 seconds.
activate or
Advertisement
Table of Contents
