Table of Contents
Advertisement
basic
position
Remote start
Factory setting
Factory setting (may vary depending on device type)
1
15.2 Change basic settings
Tip:Connect your device to a mobile
device. You can easily adjust all
settings using the Home Connect
app.
press.
1.
To open the basic settings,
2.
press.
aThe display shows Hxx.
The display shows .
Display text
rc1
re
3 seconds
a
Selection
rc0 - rc2
Start with
YES
Confirm with
3.
display shows the desired setting.
4.
display shows the appropriate value.
You can change several settings.
To save the settings,
5.
Basic settings
Description
→ "Remote Start", page
41 activate or deactivate.
The following settings are
possible:
¡With the setting "rc0"
the function is permanently
deactivated.
¡With the setting "rc1"
The function can be
selected using the button.
→ "Activate Remote Start",
page 41
¡With the setting "rc2"
the function is permanently
activated.
This basic setting is only
available after you have
connected the device to the
Connected to the Home
Connect app.
→ "Home Connect",
page 40
Reset changed settings to
factory defaults. The settings
must be made for initial
commissioning.
Press repeatedly until the
Press repeatedly until the
Press for 3 seconds.
39
Advertisement
Table of Contents
