Related Manuals for Siemens SN97YX03CE
Summary of Contents for Siemens SN97YX03CE
- Page 1 Dishwasher SN97YX03CE Information for Use Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Additional functions ..... 22 General information...... 4 Features......... 23 Intended use........ 4 Top basket ........ 23 Restriction on user group.... 4 Bottom basket ........ 24 Safe installation ........ 4 Cutlery drawer ........ 24 Safe use ........... 6 Etagere ........... 25 Damaged appliance ...... 8 Folding prongs ....... 26 Risk to children ........ 8... - Page 3 Transportation, storage and Switching on the appliance .... 36 disposal ......... 62 Setting a programme ..... 36 Removing the appliance .... 62 Setting additional functions .... 36 Protect appliance from frost... 63 Setting timer programming .... 36 Transporting the appliance .... 63 Starting the programme .... 37 Disposing of old appliance .... 63 Interrupting programme .... 37 Terminate programme.... 37...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety ¡ Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. ▶... - Page 7 Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety ▶ Never kink, crush or modify the power cord. WARNING ‒ Risk of burns! The blow opening of the Zeolith container becomes hot and can cause burns. ▶ Never touch the blow opening of the Zeolith container. Damaged appliance WARNING ‒ Risk of electric shock! ¡... - Page 9 Safety en ¡ Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. ¡ Children may become trapped in the appliance and suffocate. ▶...
-
Page 10: Safety Systems
en Safety Safety systems Protect children from possible hazards resulting from the appli- ance. The appliance is equipped with a "Childproof lock " → Page 12. -
Page 11: Preventing Material Damage
Preventing material damage en pipes supplied for the drinking Preventing material damage Preventing material dam- water and waste water connec- tions are not affected here. ¡ Modified or damaged water hoses may result in material damage and Preventing material damage Safe installation damage to the appliance. -
Page 12: Childproof Lock
en Childproof lock ¡ Unsuitable cleaning agents may Environmental protection and saving energy Environmental protection damage the appliance. Do not use a steam cleaner. and saving energy ▶ So as not to scratch the finish ▶ on the appliance, do not use Environmental protection and saving energy sponges with a rough surface or Disposing of packaging... -
Page 13: Aquasensor
Environmental protection and saving energy en During the drying phase moisture Sensor setting Description from the interior of the dishwasher is Standard Optimum setting for a stored in the mineral and heat energy mixed load and heavily is released. The heat energy is blown soiled tableware. -
Page 14: Installation And Connection
en Installation and connection installing it under a continuous work- Installation and connection Installation and connec- top that is securely connected to ad- jacent cabinets. tion "Follow the safety instructions." To ensure proper operation, connect Installation and connection → Page 4 the appliance to the power and water "Follow the instructions for elec- supply correctly. -
Page 15: Drinking Water Connection
Installation and connection en Drinking water connection Connect your appliance to a drinking water connection. Installing the drinking water connection Note ¡ If you are replacing the appliance, you must use a new water supply hose. Consult the installation instructions supplied for the steps required here. -
Page 16: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 64. -
Page 17: Controls
Familiarising yourself with your appliance en "Detergent" → Page 31 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 24 Bottom basket Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 28 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 18 en Familiarising yourself with your appliance 4 5 6 7 8 9 "Switching on the appliance" → Page 36 ON/OFF button and reset button "Switching off the appliance" → Page 37 "Terminating the programme" → Page 37 "Programmes" → Page 20 Programme buttons Info button If you press , the display shows information about selected programmes, basic settings and additional functions.
- Page 19 Familiarising yourself with your appliance en "Starting the programme" → Page 37 Start button buttons You can use these buttons to scroll between the basic settings. → "Changing basic settings", Page 40 "Changing the basic settings" → Page 40 Setting buttons "Open the appliance door." → Page 36 Door handle Display The display shows information about pro-...
-
Page 20: Programmes
en Programmes Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... - Page 21 Programmes en Programme: Programme sequence Additional func- tions Tableware: Particularly gentle: VarioSpeedPlus ¡ Cleaning delicate table- ¡ Pre-Rinse Settings in the Intelligent ware, cutlery, temperat- Home Connect ¡ Cleaning 40 °C ure-sensitive plastics, app are adjustable ¡ Intermediate rinse → "Intelligent glasses and stemware. ", ¡...
-
Page 22: Information For Test Institutes
en Additional functions flashes. Information for test institutes a The programme and the additional Test institutes are provided with in- function are saved. formation for comparability tests, e.g. Tip: To reset the programme, either according to EN60436. use the Home Connect app or reset These are the conditions for conduct- your appliance back to the factory ing the tests, however they are not... -
Page 23: Features
Features en Additional func- Additional func- tion tion gramme and at any ¡ To avoid marks and im- time when the pro- prove drying, the quant- Shine & Dry gramme is running. ity of water is increased ¡ Energy and water con- and the drying phase sumption are increased. -
Page 24: Bottom Basket
en Features To prevent the basket from sud- Bottom basket denly dropping down, hold the Arrange pans and plates in the bot- side of the basket by the top edge. tom basket. Press in the levers on the right and left on the outside of the basket. Large plates up to a diameter of Raise or lower the basket evenly to 31 cm can be arranged in the bottom... -
Page 25: Etagere
Features en Arrange cutlery with the points and sharp edges downwards. You can reorganise the cutlery drawer to make more space for longer/wider items of cutlery. Reorganising cutlery drawer You can fold down the side shelves and front prongs to make more space for longer/wider items of cut- lery. -
Page 26: Folding Prongs
en Features Folding prongs glassZone Use the folding prongs to position Use the glassZone in the top basket tableware securely, e.g. plates. to clean all types of glasses gently yet thoroughly. You can fold the prongs down to po- sition pans, bowls and glasses Selecting glassZone better. -
Page 27: Basket Heights
Before using for the first time en Pull the tab on the glassZone up Place the glassZone in the top and forwards . basket and lock in position . Check that the mounts are in the Set the slider to ON. correct position. -
Page 28: Water Softening System
en Water softening system Note: If you select Initial start-up To remove any marks from water Home Connect here, make further or other residues, we recommend settings using the Home Connect you operate the appliance without app on your mobile device. tableware before using it for the You can change the settings for first time. -
Page 29: Setting The Water Softening System
Water softening system en to the dispenser for special salt Setting the water softening immediately before the pro- system gramme starts. Set the water hardness on your appli- Unscrew the lid of the dispenser ance. for special salt and remove. Determine the water hardness and On initial start-up: Fill the dispenser the appropriate setting value. -
Page 30: Regeneration Of The Water Softening System
en Rinse aid system stances. According to manufactur- Additional run time in minutes ers, combined detergents with salt Additional water consumption in replacement substances can gen- litres erally only be used up to a water Additional power consumption in 0.05 hardness of 26 °E without adding special salt. -
Page 31: Setting The Amount Of Rinse Aid
Detergent en Add rinse aid up to the max mark. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. -
Page 32: Unsuitable Detergents
en Detergent With powder and liquid detergent the Detergent Description dosage can be individually adjusted Tabs Tabs are suitable for all to the level of soiling of the table- cleaning functions and do ware. not need to be measured For better washing and drying results out. -
Page 33: Information On Detergents
Detergent en Add the detergent to the dry deter- Detergent Description gent dispenser. Detergent con- Chlorine residue on table- taining chlorine ware may present a risk to 50 ml health. 25 ml 15 ml Information on detergents Follow the instructions on detergents in everyday use. -
Page 34: Tableware
en Tableware Close the lid of the detergent dis- Damage to glass and table- penser. ware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommendation The following table-... -
Page 35: Arrange Tableware
Tableware en To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 36: Removing Tableware
en Basic operation for the combination of energy/wa- Removing tableware ter consumption for this type of tableware and evidences conform- WARNING ity with the EU Ecodesign Direct- Risk of injury! ive. Hot tableware can cause burns to the If you do not perform any actions skin. -
Page 37: Starting The Programme
Basic operation en "Finish at" (e.g. 15:20 hours). You Press to resume the pro- can change this setting in the "Ba- gramme. sic settings" → Page 38. Close the appliance door. To activate timer programming, press . Terminate programme Note: To deactivate timer program- To end a programme early or to ming, press for approx. -
Page 38: Basic Settings
en Basic settings Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time. - Page 39 Basic settings en Basic setting Selection Description Eco forecast Switch EcoCheck on or off. When selecting the programme, the average wa- ter consumption and energy consumption is briefly shown on the display. emotionLight Switch the interior lighting of the appliance on or On via main switch off.
-
Page 40: Changing Basic Settings
en Home Connect Basic setting Selection Description Greeting Switch display of the brand name logo on or off when the appliance is switched on. Factory setting Reset Restore changed settings to the factory settings. The settings for initial start-up must be con- figured. -
Page 41: Home Connect Quick Start
Home Connect en Home Connect quick start Home Connect settings Connect your appliance to a mobile Adapt Home Connect to your needs. device quickly and easily. You can find the Home Connect set- tings in the basic settings for your ap- Installing app pliance. Which settings the display shows will depend on whether Install the Home Connect app on Home Connect has been set up and... -
Page 42: Remote Diagnostics
en Cleaning and servicing This initial registration prepares the Remote Diagnostics Home Connect functions for use and Customer Service can use Remote is only required when you want to Diagnostics to access your appliance use the Home Connect functions for if you contact them, have your appli- the first time. -
Page 43: Tips On Appliance Care
Cleaning and servicing en at https://www.siemens-home.bsh- Action Benefit group.com/store or from customer trol panel regularly us- service. ing a damp cloth and washing-up liquid. Tips on appliance care If the appliance is not This will prevent un- Follow the tips on appliance care to going to be used for a pleasant odours. -
Page 44: Filter System
en Cleaning and servicing ¡ Make sure that there are no alu- Filter system minium parts, e.g. extractor hood The filter system removes coarse grease filters or aluminium pans, in soiling from the dishwashing cycle. the interior of the appliance. ¡ If you have not run Machine Care after 3 washing cycles, the indic- ator for Machine Care will go out automatically. -
Page 45: Cleaning Spray Arms
Cleaning and servicing en Pull down the micro filter to re- Insert the filter system into the ap- move. pliance and turn the coarse filter clockwise. Make sure that the arrow mark- ‒ ings match up. Press the locking catches gether and lift the coarse filter out ... - Page 46 en Cleaning and servicing Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
-
Page 47: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 48 en Troubleshooting Fault Cause Troubleshooting Appliance door does not Appliance door brushes Install the appliance correctly as de- ▶ open at the end of the pro- against the appliance or kit- scribed in the installation instruc- gramme. chen cabinets tions and align. Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de-...
-
Page 49: Error Code / Fault Display / Signal
Troubleshooting en Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide when activated. ted. scribed in the installation instruc- tions. Error code / Fault display / Signal Fault Cause Troubleshooting E:2060 lights up. - Page 50 en Troubleshooting Fault Cause Troubleshooting E:3200 or indicator for wa- Remove the filter from the supply ter supply lights up. hose Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 51: Washing Results
Troubleshooting en Fault Cause Troubleshooting E:9001 lights up. Mains voltage is too low. This is not a fault on the appliance. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. E:9240 lights up. Filters are soiled or blocked. Clean the filters. - Page 52 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 53 Troubleshooting en Fault Cause Troubleshooting Appliance interior still wet Not a fault. The condensa- No action required. after wash cycle. tion drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
- Page 54 en Troubleshooting Fault Cause Troubleshooting Detergent residue in the ap- Lid of the detergent dis- Arrange tableware in the top basket pliance penser is blocked by items tableware so the tab collecting tray of tableware parts and will is not obstructed by tableware. → "Arrange tableware", Page 35 not open.
- Page 55 Troubleshooting en Fault Cause Troubleshooting Stubborn white coatings are Detergent substances are Change your "detergent" ▶ → Page 31. present on tableware, inside deposited there. These coat- the appliance or the door. ings cannot generally be re- Clean the appliance mechanically. ▶ moved with chemicals. The hardness range is set in- Set the Water softening system to ▶...
- Page 56 en Troubleshooting Fault Cause Troubleshooting Coloured coatings (blue, yel- You can remove deposits with "Mechanical cleaning" → Page 42 low, brown) that are difficult or impossible to remove are or a machine cleaning product. It present inside the appliance may not always be possible to com- or on stainless steel table- pletely remove deposits but they ware.
- Page 57 Troubleshooting en Fault Cause Troubleshooting Removable streaks are Tableware has been pre- Only remove large remnants of food ▶ present on glasses, glass- cleaned too intensely. The and do not prerinse tableware. ware with a metallic appear- sensors chose a weaker pro- Adjust the sensitivity of the sensors.
-
Page 58: Home Connect Problem
en Troubleshooting Fault Cause Troubleshooting Excessive formation of foam Detergent or appliance care Change the brand of detergent. ▶ occurs. product used causes excess- ive foaming. Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶... - Page 59 Troubleshooting en Fault Cause Troubleshooting → "Terminate programme", Water is left in the appliance ▶ at the end of the pro- Page 37 gramme. Appliance cannot be Software update is taking Wait until the software update has ▶ switched on or operated. place. finished.
-
Page 60: Mechanical Damage
en Troubleshooting Fault Cause Troubleshooting All LEDs lit up or flashing. Electronics have detected a Press the main switch button for ap- fault. prox. 4 seconds. → "Controls", Page 17 The appliance is reset and restar- ted. If the problem occurs again: Switch off the appliance. ‒... - Page 61 Troubleshooting en Fault Cause Troubleshooting Knocking or rattling noise. Spray arm is striking table- Arrange tableware so that the spray ▶ ware. arms do not strike tableware. With a small load the water Distribute the tableware evenly. ▶ jets directly strike against Load the appliance with more table- ▶...
-
Page 62: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 63: Protect Appliance From Frost
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 64: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance. -
Page 65: Information Regarding Free And Open Source Software
(Please search on the product requirements. website for your appliance model A detailed Declaration of Conformity and additional documents). Alternat- can be found online at siemens- ively, you can request the relevant in- home.bsh-group.com/uk/ among the formation from oss- additional documents on the product request@bshg.com or BSH Hausger-... - Page 66 en Declaration of Conformity 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. 100 mW UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 68 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001648757* 9001648757 (020406) 650 P5...