Table of Contents

Advertisement

Quick Links

Dishwasher
SN47YS01CS
en
User manual
Register your product on My Siemens and discover
exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

Advertisement

Table of Contents
loading

Summary of Contents for Siemens SN47YS01CS

  • Page 1 Dishwasher SN47YS01CS User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
  • Page 2: Table Of Contents

    Table of contents Safety ..........   4 Cutlery drawer ........ 23 General information...... 4 Etagere ........... 24 Intended use........ 4 Folding prongs ....... 25 Restriction on user group.... 4 glassZone........ 25 Safe installation ........ 5 Basket heights........ 26 Safe use ........... 6 Before using for the first time ..   26 Damaged appliance ...... 8 Performing initial start-up .... 26 Risk to children ........ 8...
  • Page 3 Customer Service......   59 Interrupting programme .... 36 Product number (E-Nr.), produc- Terminate programme.... 36 tion number (FD) and consecut- Display programme information.. 36 ive numbering (Z-Nr.) ..... 60 Switching off appliance .... 36 AQUA-STOP guarantee .... 60 Basic settings........    37 Technical specifications....   60 Overview of basic settings ..... 37 Information regarding Free and Changing basic settings.... 38...
  • Page 4: Safety

    en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner.
  • Page 5: Safe Installation

    Safety en Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions. WARNING ‒ Risk of electric shock! ¡...
  • Page 6: Safe Use

    en Safety ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury. ▶ If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side.
  • Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
  • Page 8: Damaged Appliance

    en Safety Damaged appliance Follow the safety instructions if the appliance is damaged. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face.
  • Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
  • Page 10: Preventing Material Damage

    en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡...
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en So as not to scratch the finish Zeolith drying ▶ on the appliance, do not use The appliance features a Zeolith con- sponges with a rough surface or tainer. Zeolith drying lets you save abrasive cleaning agents. energy.
  • Page 12: Sensors

    en Installation and connection If the automatic door opening is de- Sensors activated, energy consumption in- The sensors adjust the programme creases and the drying phase is usu- sequence and strength in the auto- ally reduced. matic programmes depending on the → "Overview of basic settings", level and type of soiling.
  • Page 13: Drainage Connection

    Installation and connection en installing it under a continuous work- Drinking water connection top that is securely connected to ad- Connect your appliance to a drinking jacent cabinets. water connection. "Follow the safety instructions." → Page 4 Installing the drinking water "Follow the instructions for elec- connection trical connection."...
  • Page 14 en Installation and connection The connection data for the appli- ance can be found on the rating plate. Check that the mains plug is inser- ted properly.
  • Page 15: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 60.
  • Page 16: Controls

    en Familiarising yourself with your appliance "Detergent" → Page 30 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 23 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket.
  • Page 17 Familiarising yourself with your appliance en 4 5 6 7 8 9 "Switching on the appliance" → Page 35 ON/OFF button and reset button "Switching off the appliance" → Page 36 "Terminating the programme" → Page 36 "Programmes" → Page 19 Programme buttons Info button If you press , the display shows information about selected programmes, basic settings and additional functions.
  • Page 18 en Familiarising yourself with your appliance   buttons You can use these buttons to scroll between the basic settings. → "Changing basic settings", Page 38 "Changing basic settings" → Page 38 Setting buttons "Opening the appliance door" → Page 35 Door opener Display The display shows information about pro- grammes, basic settings or additional functions.
  • Page 19: Programmes

    Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
  • Page 20: Information For Test Institutes

    en Programmes Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 21 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 35 °C household food remnants ¡...
  • Page 21: Favourite

    Additional functions en E-mail enquiries to: dishwasher@test- Tip: To reset the programme, either appliances.com use the Home Connect app or reset The product number (E-Nr.) and the your appliance back to the factory production number (FD) are required settings. here. They can be found on the rat- → "Overview of basic settings", ing plate on the appliance door.
  • Page 22: Features

    en Features Additional func- Features Features tion ¡ To ensure a higher hy- You can find an overview of the pos- Features giene status for the ap- sible features of your appliance and HygienePlus pliance and tableware, how to use them here. the temperature is These features depend on the model raised and maintained...
  • Page 23: Bottom Basket

    Features en Press in the levers on the right and Bottom basket left on the outside of the basket. Arrange pans and plates in the bot- tom basket. The basket can then slip down slightly. Raise or lower the basket evenly to Large plates up to a diameter of the right level.
  • Page 24: Etagere

    en Features Arrange cutlery with the points and Etagere sharp edges downwards. Use the cutlery shelf and space un- You can reorganise the cutlery derneath for small cups and glasses drawer to make more space for or for large items of cutlery, e.g. longer/wider items of cutlery.
  • Page 25: Folding Prongs

    Features en Folding prongs glassZone Use the folding prongs to position Use the glassZone in the top basket tableware securely, e.g. plates. to clean all types of glasses gently yet thoroughly. You can fold the prongs down to po- sition pans, bowls and glasses Selecting glassZone better.
  • Page 26: Basket Heights

    en Before using for the first time Pull the tab on the glassZone up Place the glassZone in the top and forwards ⁠ . basket and lock in position ⁠ . Check that the mounts are in the Set the slider to ON. correct position.
  • Page 27: Water Softening System

    Water softening system en Note: If you select Initial start-up Water softening system Water softening system Home Connect here, make further settings using the Home Connect Hard water leaves limescale on the Water softening system app on your mobile device. tableware as well as the washing You can change the settings for tank and parts of the appliance may initial start-up and other "Basic set-...
  • Page 28: Special Salt

    en Water softening system To open the basic settings, press Note: Only use special salt for for approx. 3 seconds. dishwashers. Do not use salt tablets. Press repeatedly until the display Do not use table salt. shows "Water hardness". Press repeatedly until the Add the special salt to the dis- right water hardness has been set.
  • Page 29: Regeneration Of The Water Softening System

    Rinse aid system en erally only be used up to a water Additional power consumption in 0.05 hardness of 26 °E without adding special salt. The consumption values specified ¡ The water hardness is 0 - 8 °E. are laboratory measurements determ- You do not need to use special ined in accordance with the currently salt.
  • Page 30: Setting The Amount Of Rinse Aid

    en Detergent Add rinse aid up to the max mark. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off.
  • Page 31 Detergent en Note: Follow the manufacturer's in- Separate detergents structions for each detergent. Separate detergents are products that do not contain components other Detergent Description than detergent, e.g. powder deter- Tabs Tabs are suitable for all gent or liquid detergent. cleaning functions and do With powder and liquid detergent the not need to be measured dosage can be individually adjusted...
  • Page 32: Unsuitable Detergents

    en Detergent ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡...
  • Page 33: Tableware

    Tableware en Close the lid of the detergent dis- Damage to glass and table- penser. ware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡...
  • Page 34: Arrange Tableware

    en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –...
  • Page 35: Removing Tableware

    Basic operation en Removing tableware Setting a programme To adjust the wash cycle to the soil- WARNING ing level of the tableware, select a Risk of injury! suitable programme. Hot tableware can cause burns to the Press the right programme button. skin.
  • Page 36: Starting The Programme

    en Basic operation Starting the programme Terminate programme Press To end a programme early or to ▶ switch from a programme that has a The programme has ended when already started, you will need to can- the display shows "Finished". cel it first. Notes Press for approx.
  • Page 37: Basic Settings

    Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time.
  • Page 38: Changing Basic Settings

    en Basic settings Basic setting Selection Description Eco forecast Switch EcoCheck on or off. When selecting the programme, the average wa- ter consumption and energy consumption is briefly shown on the display. emotionLight Switch the interior lighting of the appliance on or On via main switch off.
  • Page 39: Home Connect

    Home Connect  en Press repeatedly until the display served when operating the appliance shows "Time setting". via the Home Connect app. → "Safety", Page 4 Press repeatedly until the display shows the required time. Home Connect quick start Holding down will change the set values in 10-minute Connect your appliance to a mobile steps.
  • Page 40: Home Connect Settings

    en Home Connect Follow the instructions in the Remote Diagnostics Home Connect app. Customer Service can use Remote Diagnostics to access your appliance Home Connect settings if you contact them, have your appli- Adapt Home Connect to your needs. ance connected to the Home Con- You can find the Home Connect set- nect server and if Remote Dia- tings in the basic settings for your ap- gnostics is available in the country in...
  • Page 41: Cleaning And Servicing

    Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service.
  • Page 42 en Cleaning and servicing Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform-...
  • Page 43: Filter System

    Cleaning and servicing en Pull down the micro filter to re- Filter system move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out ⁠ . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may...
  • Page 44: Cleaning Spray Arms

    en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove ⁠ . Pull up the lower spray arm to re- move.
  • Page 45: Troubleshooting

    Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 46: Error Code / Fault Display / Signal

    en Troubleshooting Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
  • Page 47 Troubleshooting en Fault Cause Troubleshooting E:3200 or indicator for wa- The filters in the water con- Switch off the appliance. ter supply lights up. nection of the supply or Pull out the mains plug. AquaStop hose are blocked. Turn off the water tap. Unscrew the water connection.
  • Page 48: Washing Results

    en Troubleshooting Fault Cause Troubleshooting E:9001 lights up. Mains voltage is too low. This is not a fault on the appliance. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. A different error code ap- A technical fault is present.
  • Page 49 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
  • Page 50 en Troubleshooting Fault Cause Troubleshooting Appliance interior still wet Not a fault. The condensa- No action required. after wash cycle. tion drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
  • Page 51 Troubleshooting en Fault Cause Troubleshooting Detergent residue in the ap- Lid of the detergent dis- Arrange tableware in the top basket pliance penser is blocked by items tableware so the tab collecting tray of tableware parts and will is not obstructed by tableware. → "Arrange tableware", Page 34 not open.
  • Page 52 en Troubleshooting Fault Cause Troubleshooting Stubborn white coatings are Detergent substances are Change your "detergent" ▶ → Page 30. present on tableware, inside deposited there. These coat- the appliance or the door. ings cannot generally be re- Clean the appliance mechanically. ▶ moved with chemicals. The hardness range is set in- Set the Water softening system to ▶...
  • Page 53 Troubleshooting en Fault Cause Troubleshooting Coloured coatings (blue, yel- You can remove deposits with "Mechanical cleaning" → Page 41 low, brown) that are difficult or impossible to remove are or a machine cleaning product. It present inside the appliance may not always be possible to com- or on stainless steel table- pletely remove deposits but they ware.
  • Page 54 en Troubleshooting Fault Cause Troubleshooting Removable streaks are Tableware has been pre- Only remove large remnants of food ▶ present on glasses, glass- cleaned too intensely. The and do not prerinse tableware. ware with a metallic appear- sensors chose a weaker pro- Adjust the sensitivity of the sensors.
  • Page 55: Home Connect Problem

    Troubleshooting en Fault Cause Troubleshooting Excessive formation of foam Detergent or appliance care Change the brand of detergent. ▶ occurs. product used causes excess- ive foaming. Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶...
  • Page 56: Mechanical Damage

    en Troubleshooting Fault Cause Troubleshooting → "Terminate programme", Water is left in the appliance ▶ at the end of the pro- Page 36 gramme. Appliance cannot be Software update is taking Wait until the software update has ▶ switched on or operated. place. finished.
  • Page 57: Noise

    Troubleshooting en Fault Cause Troubleshooting Appliance door cannot be When closed, the appliance door, closed. its decor or attached parts should not knock against adjacent cabin- ets or the worktop. Lid on the detergent dis- Detergent dispenser or lid Remove detergent residue. ▶...
  • Page 58: Clean Wastewater Pump

    en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down ⁠ . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
  • Page 59: Protect Appliance From Frost

    Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
  • Page 60: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)

    en Technical specifications With any warranty claims, we will AQUA-STOP guarantee make sure that your appliance is re- In addition to warranty claims against paired by trained after-sales techni- the seller under the purchase agree- cians using genuine spare parts, in- ment and in addition to our manufac- cluding after the manufacturer's war- turer's warranty, we offer compensa-...
  • Page 61: Information Regarding Free And Open Source Software

    Technical specifications en in the product number (E-Nr.) on the Power consumption Off mode/standby rating plate. Alternatively you can mode: 0.50 W also find the model identifier in the Left-on mode: 0.50 W first line of the EU energy label. Networked standby: 2.00 W Information regarding Free Time in left-on mode: 0 min...
  • Page 62: Declaration Of Conformity

    Directive 2014/53/EU. A detailed RED Declaration of Con- formity can be found online at www.siemens-home.bsh-group.com among the additional documents on the product page for your appliance. 5 GHz WLAN (Wi-Fi): For indoor use only.
  • Page 64 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001591339* 9001591339 (000928) 650 P5...

Table of Contents