Table of Contents
Advertisement
Fault
Programme starts automat-
ically.
Appliance stops during the
programme or cuts out.
Mechanical damage
Fault
Appliance door cannot be
closed.
Lid on the detergent dis-
penser cannot be closed.
Noise
Fault
Filling valves making knock-
ing noises.
Knocking or rattling noise.
Cause
You did not wait until pro-
gramme ended.
Appliance door is not closed
properly.
Power and/or water supply
has been interrupted.
Top basket is pressing
against inner door and pre-
venting appliance door from
being closed securely.
Cause
Door lock has been activ-
ated.
Door cannot be closed due
to installation method.
Automatic door opening is
not in home position.
Detergent dispenser or lid
are blocked by sticky deter-
gent residue.
Cause
Caused by the domestic in-
stallation. No appliance fault
present. Does not affect
functioning of the appliance.
Spray arm is striking table-
ware.
Troubleshooting en
Troubleshooting
→ "Terminate programme",
▶
Page 37
Close the appliance door.
▶
Check the power supply.
1.
Check the water supply.
2.
Check whether the rear panel of the
▶
appliance is being pressed in by a
socket or hose holder that has not
been removed.
Arrange the tableware so that no
▶
parts project beyond the basket
and prevent the appliance door
from closing properly.
Troubleshooting
Close the appliance door with
▶
greater force.
Check whether the appliance has
▶
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.
Wait for a second after opening the
▶
appliance door.
Remove detergent residue.
▶
Troubleshooting
Can only be remedied in the do-
▶
mestic installation.
Arrange tableware so that the spray
▶
arms do not strike tableware.
59
Advertisement
Table of Contents
