Changing Basic Settings; Home Connect; Remote Start ", Page - Siemens SN45ZS70CS Information For Use

en Home Connect
Basic setting
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Press ⁠ .
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows Hxx.
a The display shows
Press
3.
the display shows the required set-
ting.
Press repeatedly until the dis-
4.
play shows the right value.
You can change several settings.
To save the settings, press
5.
for 3 seconds.
36
Display text Selection
Cn0 Cn0 - Cn1
rc1 rc0 - rc2
rE Start with
YES
Confirm with
⁠ .
repeatedly until
Description
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the Home Connect app.
→ "Home Connect ", Page 36
Activate or deactivate
→ "Remote Start ", Page 37.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 38
¡ With the setting "rc2", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
→ "Home Connect ", Page 36
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.