Measure Ac And Dc Current On A Rectification Circuit; Figure 3-2 Terminal Connection When Measuring Ac And Dc Current On A Rectification Circuit - Agilent Technologies U3402A User's And Service Manual

U3402-90001.book Page 54 Friday, July 24, 2009 4:04 PM
3 Measurement Tutorial
N O TE
WARN IN G
54
Downloaded from Elcodis.com electronic components distributor
6 Press
. Use
secondary display.
• Press
• Press to select the suitable range if DCV+ACV ripple is above the scale of the
current range.

Measure AC and DC Current on a Rectification Circuit

A single measurement for both AC current and DC current can be displayed
through both display while testing a rectifier circuit.
• Make sure you select the correct input terminal according to the input range
used.
• Do not apply more than 12 A to the A input terminal to avoid the multimeter from
damage.
1 Connect the red and black test leads to the input terminal and probe the test
points as shown in
–
AC/DC
current
source +
Figure 3-2 Terminal connection when measuring AC and DC current on a rectification
circuit
and to select autoranging or manual ranging for
to disable the secondary display.
Figure 3- 2.
U3402A User's and Service Guide