Adjusting The Handle; Figure 1-2 Type Of Handle Position; Figure 1-3 Attaching And Detaching The Handle - Agilent Technologies U3402A User's And Service Manual

U3402-90001.book Page 7 Friday, July 24, 2009 4:04 PM

Adjusting the Handle

U3402A User's and Service Guide
Downloaded from Elcodis.com electronic components distributor
To adjust the handle, grasp the handle by the side and pull outward. Then,
rotate the handle to the desired position. Below are the possible
handle positions.
Benchtop
position

Figure 1-2 Type of handle position

To attach or detach the handle, rotate the handle upright and pull it out from
the sides of the multimeter. See

Figure 1-3 Attaching and detaching the handle.

Carrying position
Handle removal position
Figure 1- 3.
Getting Started 1
7