How To Install Usb Drivers (Windows); Con Guration (Windows) - Teltonika GH5200 Manual

– GH5200 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your
device named – "GH5200_last_7_imei_digits", without LE in the end. Enter default password 5555, press Connect and then select Done.
3. You are now ready to use the device on your computer.

How to install USB drivers (Windows)

1. Please download COM port drivers from here. here (https://teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip).
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button. Setup will continue installing the driver and eventually the con rmation window will appear. Click
Finish to complete the setup.

Con guration (Windows)

At rst GH5200 device will have default factory settings set. These settings should be changed according to the user's needs.
Main con guration can be performed via Teltonika Con gurator software. Con gurator operates on Microsoft Windows OS and uses
prerequisite MS .NET Framework. Make sure you have the correct version installed.
Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. +370 5 212 7472
Faks. +370 5 276 1380
www.teltonika-iot-group.com
info@teltonika.lt