Page 2
“ON” at all times. Provisions shall be made to prevent unauthorized shutoff. The ANSI Z358.1 standard requires an uninterrupted supply of flushing fluid. Bradley plumbed emergency fixtures require a minimum of 30 PSI (0.21 MPa) flowing pressure.
Page 3
3. Open water supply lines. Test for leaks and adequate water flow. Step 3: Connect water supply Do not rely on Bradley’s Drench Shower to support supply piping. 1. Connect water supply piping to 1" NPT inlet on unit (piping supplied by installer). Provide adequate supports (supplied by installer) for supply pipe using pipe hangers or other means.
Need help?
Do you have a question about the S19-120HFP and is the answer not in the manual?
Questions and answers