Page 2
S19-110BF Installation IMPORTANT Read this installation manual completely to ensure proper installation, then file it Installation with the owner or maintenance department. Compliance and conformity to drain requirements and other local codes and ordinances is the responsibility of the installer.
• Bottom edge of showerhead should be 7'-0" (2134mm) from floor. Step 3: Connect water supply IMPORTANT: Do not rely on Bradley’s 42" Combination Unit to support supply piping. (1067mm) 1. Connect water supply piping to 1-1/4" NPT inlet to Floor on unit (piping by installer).
Page 4
S19-110BF Installation Assembly of Components 1-1/4" NPT Supply Inlet NOTE: If tee (Item 7) is used as the supply inlet, then relocate pipe plug (Item 4) and one coupling (Item 2) 10.1 to this location. 10.2 10.3 10.4 10.5 10.11...
Need help?
Do you have a question about the S19-110BF and is the answer not in the manual?
Questions and answers