sage indicating that the change
could not be completed will be dis-
played.
Check which wheel set is installed
and perform the change procedure
again from the beginning.
9
If the specified tire inflation
pressure of the wheel set
installed differs from that of
the previous set, it will be
necessary to perform the tire
inflation pressure setting pro-
cedure of the tire pressure
warning system. (P.290)
If the specified tire inflation pres-
sure is the same, it will not be nec-
essary to perform the tire inflation
pressure setting procedure.
10Register the position of each
wheel.
6-3. Do-it-yourself maintenance
Tire inflation pressure
Checking the specified
tire inflation pressure
The recommended cold tire
inflation pressure and tire size
are displayed on the tire and
loading information label.
(P.370)
Inspection and adjust-
ment procedure
Tire valve
299
6