Toyota Corolla Hatchback 2023 Manual page 291

sure, a message indicating that set-
ting has been completed will be
displayed on the multi-information
display.
7-inch display

1
Park the vehicle in a safe
place and then start the
engine.
The tire inflation pressure cannot
be set while the vehicle is moving.
2
Select of the multi-infor-
mation display and then
press .
3
Press or to select
"Vehicle Settings" and then
press and hold
4
Press or to select
"TPWS setting" and then
press .
5
Press or to select
"Tire Pressure Setting" and
then press .
6
Press or to select
"Setting by Specified Pres-
sure" and then press
6-3. Do-it-yourself maintenance
7
Select the desired tire pres-
sures, then press
The tire pressure warning light will
slowly blink 3 times.
After setting the tire inflation pres-
sure, a message indicating that set-
ting has been completed will be
displayed on the multi-information
display.
■ If the tire inflation pressure can-
not be set easily
● If the tire pressure warning light
does not blink 3 times when start-
ing the tire inflation pressure set-
ting procedure, the procedure
may not have started. Perform the
procedure again from the begin-
ning.
.
● If tire inflation pressure setting
procedure cannot be completed
after performing the above proce-
dure, contact your Toyota dealer.
.
291
.
6