Adjusting the set vehicle
speed
Adjusting the set vehicle
■
speed using the switches
To change the set vehicle
speed, press the "+" or "-" switch
until the desired speed is dis-
played.
1
Increase set vehicle speed
2
Decrease set vehicle speed
The set vehicle speed will
increase or decrease as follows:
Fine adjustment: By 1 mph (1.6
km/h) or 1 km/h (0.6 mph) each
time the switch is pressed
Large adjustment: Increases con-
tinuously while the switch is
pressed and held
Increasing the set vehicle
■
speed using the accelerator
pedal
1
Depress the accelerator
pedal to accelerate the vehi-
cle to the desired vehicle
speed.
2
Press the "+" switch.
4-5. Using the driving support systems
Canceling/resuming con-
trol
1
Press the cancel switch or
driving assist switch to cancel
control.
Control will also be canceled if the
brake pedal is depressed.
2
Press the "RES" switch to
resume control.
■
Automatic cancellation of the
cruise control
In the following situations, the cruise
control will be canceled automati-
cally:
●
When the vehicle speed drops
approximately 10 mph (16 km/h)
or more below the set vehicle
speed
●
When the vehicle speed drops
below approximately 20 mph (30
km/h)
●
When the brake control or output
restriction control of a driving sup-
port system operates (For exam-
ple: PCS, drive-start control)
●
When the parking brake has been
operated
●
Situations in which some or all of
the functions of the system cannot
operate: P.166
203
4