Connecting
5.2 Antenna cable(s) connection
Cable wiring
See pin numbers on plastic of M12 connector under Analog inputs cable (Page 46).
NOTICE
Damage on the external pressure transducer
If you do not re-assign the wiring on the connector of the analog input cable according to the
electrical connection of the external pressure transducer, the external pressure transducer
might be damaged.
Always re-assign the wiring on the connector of the analog input cable according to the
electrical connection of the external pressure transducer.
1. Screw together the M12 connector parts, making sure the parts are tightened correctly.
2. Screw the protection cover onto the M12 female. The plastic loop must be around the cable.
24
SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA