Siemens SITRANS FM MAG 8000 IIoT Operating Instructions Manual page 25

Mount cable gland with antenna and analog inputs cable
1. Push the antenna cable through the upper and cover parts of cable gland.
2. Using, for example, a screw driver, push through the rubber tubing to open its side.
3. Carefully push the antenna cable into the rubber tubing from the side and remove the tool
(e.g. screw driver).
4. Check that the two cables are inserted correctly into the rubber tubing.
5. Insert cables into MAG 8000 hole.
6. Screw M20 cable gland into MAG 8000 housing.
Make sure the gland is tightened to torque 10 Nm.
SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA
Connecting
5.2 Antenna cable(s) connection
25