Advertisement
Quick Links
Advertisement
Related Manuals for Ranger design 5044
Summary of Contents for Ranger design 5044
- Page 1 INSTALLATION GUIDE 5044 Raised Base for 5045 Cab Box Sprinter...
-
Page 2: Required Items
QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup........................................3 Phase 2 - Installation q 2.1 Assembly With 5045 Cab Box............................... q 2.2 Install In Van......................................REQUIRED ITEMS q Cordless Impact q 3/8” Hex Socket Bit q 7/16” Hex Socket Bit PERSON... -
Page 3: Phase 1 - Assembly
Serrated Nut 4× 4× 1/4"-20 # 94-112 ZINC 5× 5× Flat Washer #92-104 Screw #14 × 1-1/4" 9× 9× # 98-112 1/4", 3/4" OD ZINC For technical support, contact us at 1-800-565-5321 5044 Installation Guide | REV.B2 | Page 3... - Page 4 NOTE: 5045 Cab Box is a separate unit. TOOLS q Cordless Impact q 7/16” Socket 4× 4× #90-108 Hex Bolt 1/4”-20 × 5/8" #98-112 Flat Washer #94-112 Serrated Nut 5044 54-0680 For technical support, contact us at 1-800-565-5321 5044 Installation Guide | REV.B2 | Page 4...
-
Page 5: Phase 2 - Installation
• Use the 5 self-drilling screws to secure the cab box raiser to the floor. TOOLS q Cordless drill q 3/8” Driver Bit HARDWARE USED 5× #92-104 Screw #14 × 1-1/4" For technical support, contact us at 1-800-565-5321 5044 Installation Guide | REV.B2 | Page 5... - Page 6 You have successfully installed your 5044 Raised Base. Thank you for doing business with us. cs@rangerdesign.com For any feedback or suggestions you may have, please contact: For technical support, contact us at 1-800-565-5321 5044 Installation Guide | REV.B2 | Page 6...