Advertisement
Quick Links
Advertisement
Related Manuals for Ranger design 5047
Summary of Contents for Ranger design 5047
- Page 1 INSTALLATION GUIDE 5047 Raised Base for 5040/5045 Cab Box ProMaster ( Steel )
-
Page 2: Required Items
QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup............................... 3 Phase 2 - Installation q 2.1 Installation............................q 2.2 Install With 5040/5045 Cab Box....................... q 2.3 Using the Plusnut Tool........................REQUIRED ITEMS q Cordless Impact q Cordless Drill q Tape Measure q Marker q 7/16”... -
Page 3: Phase 1 - Assembly
#90-204 Hex Bolt 1/4" × 3/4" 4× 4× # 94-112 1/4”-20 ZINC #98-106 Flat Washer Flat Washer 8× 8× 1/4” # 98-106 #94-112 Serrated Nut ZINC 5047 Installation Guide | REV. A1 | Page 3 For technical support, contact us at 1-800-565-5321... -
Page 4: Phase 2 - Installation
NOTE: 5040 and 5045 Cab Box are separate units. TOOLS q Cordless drill q 7/16” Socket HARDWARE USED 4× 5045 SHOWN #90-110 Hex Bolt 1/4" × 1-1/4" #98-106 Flat Washer 5047 Installation Guide | REV. A1 | Page 4 For technical support, contact us at 1-800-565-5321... - Page 5 Plusnut and the 9/16" wrench as shown. a 7/16" socket until the Plusnut locks. Then remove the bolt by turning the impact in reverse. FORWARD REVERSE 5047 Installation Guide | REV. A1 | Page 5 For technical support, contact us at 1-800-565-5321...
- Page 6 You have successfully installed your 5047 Raised Base. Thank you for doing business with us. cs@rangerdesign.com For any feedback or suggestions you may have, please contact: 5047 Installation Guide | REV. A1 | Page 6 For technical support, contact us at 1-800-565-5321...