Accident Prevention; Function Control; General - probst KIG-I Operating Instructions Manual

Safety
2.7

Accident prevention

•
The workplace has to be covered for unauthorized persons, especially children.
•
Take care in case of thunderstorm!
•
The workplace must be sufficiently illuminated.
•
Take care with handling wet, dirty and not solidified components.
•
The working with the device in case of atmospheric editions under 3 °C (37,5 °F) is forbidden!
Because the goods could be fall down caused by dampness or freezing.
2.8

Function Control

2.8.1

General

•
Before using the device check the functions and the working condition.
•
Maintenance and lubrication are only permitted when device is shut down!
•
Do not use the device, until all faults which can cause safety hazards are removed.
•
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
•
The operating instructions must be available at the workplace every time.
•
Do not remove the type plate of the machine.
•
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
5720.0020 V3
6 / 15
GB