Step 4 Booster Location & Connect Cables; Step 5 Connect Power Supply To Booster - Wilson Electronics WeBoost Drive Reach RV Installation Manual

STEP 4: Booster Location
& Connect Cables
Find a location to place the Drive Reach
Booster and secure it with provided bracket.
Connect cable from Outside Antenna to
labeled booster port and connect cable from
Inside Antenna to labeled booster port.
STEP 5: Connect Power
Supply To Booster
Connect the power supply cord to the
end of the booster, labeled " - - - ", and
connect into a 110V wall plug. Enjoy your
boosted signal!
from Inside
~
.
Antenna
~ ♦
I
Booster
[ I
-
]
,t
a
from Outside
=
ij
Antenna
Refer to Installation Guide for Detailed Instructions.