ABB COPA-XT DT43F Instruction Bulletin page 2

Electromagnetic flowmeter in 2-wire technology with pulsed dc magnetic fields

Table of Contents

You have purchased a high quality, modern

Electromagnetic Flomweter in a Compact Design

from Abb Automation Products. We thank you for your purchase

and the confidence you have shown in us.

This Instruction Bulletin contains the instructions relating to the

assembly and installation of the instrument and the specifications

for this instrument design. Abb Automation Products reserves the

right to make hardware and software refinements which

enhance the operation of the instrument without prior notice.

Should any questions which may arise that are not specifically answered by

these instructions please contact Abb Automation Products at our

main plant in Göttingen, Germany Tel. 049-551-905-0

or one of our Technical Sales Bureaus.

This converter and the flowmetering system comply with the

interference compatibility requirements listed in the

NAMUR-Recommendations NE21 5/93 and the

EMC Guideline 89/336/EWG (EN 50081-1, EN 50081-2)

(EN 50082-1, EN 50082-2)

Table of Contents

Copa-xt dt43w