Table of Contents
Advertisement
Submenu/Parameter
Submenu
Operating Mode
ENTER
Load data from
ext. EEPROM
Store data in
ext. EEPROM
Model Number
Part Number
TAG Number
Service-Code
Electromagnetic Flowmeter COPA-XT
Entry Type
from table
Direction
Forward/Reverse
Displ. Direction
normal
from table
from table
–
numeric
numeric
Comments
Exit from submenu
C/CE
Select flow direction to be measured, both forward and reverse or
forward only.
Normal/Inverse
Reverse the flow direction indicators in the display
normal = flow direction same as arrow on flowmeter
inverse = flow direction opposite to arrow on flowmeter
When a converter is exchanged, the data stored in the external
EEPROM are automatically uploaded. It is also possible to upload
the data stored in the external EEPROM by using this command.
After the start-up has been completed, the meter location
parameters stored in the converter can be downloaded into the
external EEPROM.
Identification of the installed software version.
03/98 = Date of issue
A.00 = Revision level
An alphanumeric TAG-Number with a maximum of 16 characters,
upper and lower case letters and/or numbers can be entered.
Only for ABB Automation Products Service.
21
Advertisement
Table of Contents
