NetVanta 4305 Hardware Installation Guide
NetVanta T1/FT1+DSX-1 NIM (P/N 1200863L1 or P/N 1202863L1)
The T1/FT1 + DSX-1 NIM (see Figure 5) provides a full T1 or fractional T1 network interface and a DSX-
1 interface. Refer to Table A-4 on page 46 for the WAN-T1 connector pinout, Table A-6 on page 47 for the
DSX-1 connector pinout, and Table A-9 on page 49 for the DBU connector pinout. An optional DIM is
required for dial backup applications.
Features and Specifications
Operating Modes
•
T1/FT1 Frame Relay
•
T1/FT1 PPP
T1/FT1 Interface
•
Line Rate: 1.544 Mbps +/- 75 bps
•
Line Code: AMI or B8ZS
•
Framing: D4 (SF) or ESF
•
FT1 Line Rate: DS0 Channelized
(multiples of 56/64 kbps)
•
Input Signal: 0 to -36 dB (DS-1)
•
Line Build-Out: 0, -7.5, -15, -22.5 dB
•
Connector: RJ-48C
•
DS0 Assignment: Programmable
DSX-1 Interface
•
Line Interface: DSX-1 per ANSI T1.102
•
DSX Receiver Input Range: -10 dBdsx to
+6 dBdsx
•
Line Rate: 1.544 Mbps
•
Capacity: 1 to 24 DS0s
•
Line Codes: AMI, B8ZS
•
Framing: D4 (SF) or ESF
•
Line Length: 0 to 655 feet and -7.5 dB
•
Connector: RJ-48C
•
DSX-1 Interface to PBX
Clock Source
•
Network
•
Internal
•
DSX-1
61200890L1-34B
WAN-T1
DSX-1
Figure 5. NetVanta T1/FT1+DSX-1 NIM
© 2004 ADTRAN, Inc.
DBU
Diagnostics
•
Test pattern generation and detection: 511
•
Network loopbacks (local and remote);
responds to inband loop codes (T1 interface
only)
•
Alarm generation and detection
•
Network and user sets of performance data
(15 minutes and 24 hours)
Relevant Requirements/Standards
•
EMC - see Electromagnetic Compatibility
(EMC) Table on page 6.
•
ACTA/FCC Part 68
•
Industry Canada CS03
•
UL and CUL
•
T1 Interface: Pub 62411
•
ESF Format Interface: TR. 194
•
ESF Performance Monitoring: TR. 54016
and T1.403
Environmental
•
Operating Temperature: 0 to 50
•
Storage Temperature: -40 to 85
•
Relative Humidity: Up to 95%
noncondensing
Physical
•
Dimensions: 4.25" x 2.75"
Option Modules
o
C
o
C
29