Netvanta T1/Ft1+Dsx-1 Nim (P/N 1200863L1); Figure 10. Netvanta T1/Ft1+Dsx-1 Nim - ADTRAN NETVANTA 3000 SERIES Hardware Installation Manual

NetVanta 3000 Series Routers

NetVanta T1/FT1+DSX-1 NIM (P/N 1200863L1)

The T1/FT1 + DSX-1 NIM (shown in Figure 10) provides a T1 WAN interface for the NetVanta 3000
Series Routers. The T1/FT1 + DSX-1 NIM provides a full T1 or fractional T1 network interface and a
DSX-1 interface. Refer to Table F on page 49 for the WAN-T1 connector pinout, Table H on page 50 for
the DSX-1 connector pinout, and Table L on page 51 for the DBU connector pinout. An optional DIM is
required for dial backup applications.
Features and Specifications
Operating Modes
• T1/FT1 Frame Relay
• T1/FT1 PPP
T1/FT1 Interface
• Line Rate:
• Line Code:
• Framing:
• FT1 Line Rate:
• Input Signal:
• Line Build-Out:
• Connector:
• DS0 Assignment:
DSX-1 Interface
• Line Interface:
• DSX Receiver Input Range: -10 dBdsx to +6 dBdsx
• Line Rate:
• Capacity:
• Line Codes:
• Framing:
• Line Length:
• Connector:
• DSX-1 Interface to PBX
Clock Source
• Network
• Internal
• DSX-1
61200860L1-34C
WAN-T1 DSX-1

Figure 10. NetVanta T1/FT1+DSX-1 NIM

1.544 Mbps +/- 75 bps
AMI or B8ZS
D4 (SF) or ESF
DS0 Channelized (multiples of 56/64 kbps)
0 to -36 dB (DS-1)
0, 7.5, 15, 22.5 dB
RJ-48C
Programmable
DSX-1 per ANSI T1.102
1.544 Mbps
1 to 24 DS0s
AMI, B8ZS
D4 (SF) or ESF
0 to 655 feet and -7.5 dB
RJ-48C
© 2003 ADTRAN, Inc.
Hardware Installation Guide
DBU
25